VAG-Check WM6.5 TG-01

WM携帯などでECUに接続し、エラーコードなどが見れるVAG-Check
汎用OBDケーブルのWM用ドライバのデバイスIDがINFファイルに記載されていないため、
Win7でのIDとWM用のIDを書き換えてからインストール

Win7 x64 デバイスID;
USB\VID_0403&PID_6001&REV_0600
USB\VID_0403&PID_6001

WM6 FTDIPORT.INF ;
[FtdiHw]
%VID_0403&PID_6001.DeviceDesc%=FtdiPort232,FTDIBUS\COMPORT&VID_0403&PID_6001
%VID_0403&PID_6010.DeviceDesc%=FtdiPort232,FTDIBUS\COMPORT&VID_0403&PID_6010
%VID_0403&PID_6011.DeviceDesc%=FtdiPort232,FTDIBUS\COMPORT&VID_0403&PID_6011

ftdi_ser.dll
http://www.ftdichip.com/FTDrivers.htm

In addition to the modifications made to the FTDIBUS.INF file to accommodate driver matching, the following entries in the FTDIPORT.INF file must be changed to match the VID and PID combination:

[FtdiHw]
%VID_0403&PID_6001.DeviceDesc%=FtdiPort232,FTDIBUS\COMPORT&VID_0403&PID_6001

[FtdiHw.NTamd64]
%VID_0403&PID_6001.DeviceDesc%=FtdiPort2232,FTDIBUS\COMPORT&VID_0403&PID_6001

In the case of the FTDIPORT.INF file, separate entries are not needed for each interface of FT2232 devices as each port of the FT2232 is supported by the same entry:

[FtdiHw]
%VID_0403&PID_6010.DeviceDesc%=FtdiPort232,FTDIBUS\COMPORT&VID_0403&PID_6010

[FtdiHw.NTamd64]
%VID_0403&PID_6010.DeviceDesc%=FtdiPort2232,FTDIBUS\COMPORT&VID_0403&PID_6010

The device description string may be modified to display a custom device port name in the device manager if so desired in the section listed below:

[Strings]
VID_0403&PID_6001.DeviceDesc=”USB Serial Port”

Advertisements
This entry was posted in T4. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s